Sign In
Ask UTP
Lecturer Search
Photo
Position
Professor
Name
Prof Dr Faiz Ahmad
Nationality
Pakistan
Email
faizahmad@utp.edu.my
Department
Mechanical Engineering
Qualifications

, N/A in Powder Injection Molding by N/A

1984, Degree in Metallurgy and Materials Science by University of The Punjab

1990, N/A in Ph.D by Brunel University, West London UK

1983, Degree in Degree in Metallurgy and Materials Sciences by Institue of Chemical Engineering, Punjab University Lahore Pakistan

Specialization
  1. Metal Injection Molding, Nanocomposites, Biomedical Devices, Intumescent Fire Retardant, Composite Machining
    • Failure Analysis of Pump Shaft
Research

Nano-Polishing of Ti-6Al-4V with Ionic Liquid

Synthesis of Novel PDMS/BPA Epoxy Resin for Development of Non-Toxic Intumescent Fire Retardant Coatings

Study on Thermal and Mechanical Properties of Short Hybrid Fibers Reinforced Epoxy-Based Intumescent Fire Retardant Coating for Structural Application

Enhancement of Intumescent Fire-Retardant Coating for Steel Structures Using Synergistic Filler from Modified Bauxite Waste

Enhancement of Properties of Fire Retardancy and Strength of Intumescent Coatings by Refractory-Types Hybrid Fibre Reinforcement for Passive Fire Protection of Steel Structures

Effects of Sintering Environment on Mechanical Properties & Corrosion Resistance of the Powder Injection Molded 316L Stainless Steel

Fundamental Study on Synthesis and Characterization of Inorganic Nano-Filler Reinforced Intumescent Fire Retardant Coating for Structural Application

​Development of Prototype of Nano Ceramic Fillers Reinforced Intumescent Fire Retardant Coating for Fire Protection of Structures.

Enhancement of Fire Resistance and Strength Properties of Intumescent Coatings by Refractory-Types Hybrid Fiber

Pre-Commercialization of Copper–Carbon Nanotube Nanocomposite for Thermal Management System in LED Applications

A New Intumescent Fire Retardant Material Based on Expandable Graphite and Local Inorganic Fillers

Green Intumescent Fire Protective Coating for Structural Application

Development of Prototype of Mineral Based Intumescent Fire Retardant Coating for Fire Protection of Structures

Development of a Thermal Management System for a Commuter Electric Vehicle for PGMC 2012

Friction Stir Welding (FSW) of A1 242/A12O3 Metal Matrix Composite

Corrosion Behaviour of Powder Injection Moulded Parts Sintered in Vacuum

Metal Injection Moulding of Carbon Nanotubes Reinforced Copper Composites for Thermal Management

Investigation of Mechanical Properties of Multi-Walled Carbon Nanotubes/Polypropylene (MWCNT/PP) Nanocomposites

Drilling and Finite Element Modeling of Drilling Behavior of Fiber Composite and Hybrid Fiber Composite

Co/Cr/Pt Nanowires for High Density Memory Storage Media

Development of CNTs/Cu Nano-Composite Heat Sink for Electronic Packaging Applications

Publications
No.Title of Publication
1Sami et al
2Sami Ullah
3 M.F.Arif
4M.R. Raza
5Faiz Ahmad
6 Mazli Mustapha
7Gehad Goudah
8Faiz Ahmad
9Alexis M.Nanimina
10Muhammad Rafi Raza
11 M.Rafi Raza
12Faiz Ahmad
13Faiz Ahmad and M. Rafi Raza
14 Faiz Ahmad
15Gehad Goudah M.Soluiman
16 Sami Ullah
17 Hannatul H. Dzulkafl
18 N. Amir* and Faiz Ahmad
19Wan Nursheila Wan Jusoh
20M. Rafi  Raza
21Wan Nursheila Wan Jusoh
22Faiz Ahmad M. Rafi Raza and A. Majdi B.A Rani
23Muhammad Rafi Raza
24Sami Ullah
25M. Azuwan and   Faiz Ahmad
2692. Faiz Ahmad
2791. P.Megat Yusoff*
28103. Sami Ullah
2990. M.Rafi  Raza
3085. Sami Ullah
3184. Faiz Ahmad and M. Rafi Raz
32Faiz Ahmad1
3381. Faiz Ahmad and M.R. Raza
3480. Mazli Mustapha
3575. Faiz Ahmad and M.R. Raza
3674. Faiz Ahmad
37H.Hazwani Dzulkafli
3870. Ehsan Mohammadpour1
3969. Alexis Mouangue  Nanimina
40Faiz  Ahmad* S.H.Jason Lo
4167. Faiz Ahmad and M. Raza Malik
4266. W.C.Pusptasari
4365. Faiz Ahmad
4464. Faiz Ahmad
4563. Faiz Ahmad
4662. Faiz Ahmad
4761. M. Bin Sudin
4860. G. Goudah 1*
4959. N. Amir*
5058. A.M. Abdul-Rani1
5157. Mohd Radzi Mohd Anua
5255. Ahmad Majdi Abdul Rani1
5354. Khairul Fuad
5453. G. Nugroho
5552. W. C. Puspitasari
5651. W.C.Puspitasari
5750. Faiz Ahmad
5849. S. H. Mohd. Ramli1
5947. S. H. Mohd. Ramli
6043. Faiz Ahmad
6142. K.E. Kee1
6241. Faiz Ahmad
6339. M.Sudine
6438. Faiz Ahmad
6537. Faiz Ahmad
6636. P.Megat Yusoff
6735. A.Majdi Ab.Rani
68Faiz Ahmad
6989. R.M. German and Faiz Ahmad
7032. H.P.S. A. Khalil
7130. Abdul Khalil H.P.S
7228. Faiz Ahmad
7327. Faiz Ahmad
7426. Faiz Ahmad
7525. S.H.Mohd Ramli
7624. Faiz Ahmad
7723. A.A.Shaari
7822. A.Munir
7920. S.H.Ramli
8019. K.Fuad
8118. K.E.Kee and Faiz Ahmad
8217. Faiz Ahmad
8316. Faiz Ahmad
8415. Faiz Ahmad
8514. S.Shahnaz
8613. I.E. Pinwill
87Faiz Ahmad
8811. Faiz Ahmad
89Faiz Ahmad and Malik Nazeer Ahmad
909. Abid A. Khan
918. Faiz Ahmad
92Faiz Ahmad
934. Rafique  Ahmad
94Faiz Ahmad
952. M.J.Bevis
961. Faiz Ahmad et.al
971. Inorganic fillers based intumescent coating for fire Protection- Submitted (2009)- in process
982. Expandable graphite based fire resistance intumescent coating- submitted (2010)-in process
993. Nano heat Sinks – in progress (2010)
1004. Efficient Intumescent coating – in progress 2010
1015. Char strengthening mechanism of intumescent coating.- in Progress- 2010
102Chapters in Books
1031. “Investigation into impact property for New LRT Brake Pad Material Formulation using Izod and Ch
1042. Effect of Temperature on Hardnes
1053. A study of Hardness of Brake Pad Formulatio
1064. Selection of Suitable Light Rail Transit (LRT) Brake Pad Formulations using Quality Function Dep
1075. A New Route for Fiber Management in Powder Injection Molded  Metal Matrix Composite
1086. A Study of Compounding Process of Metal Matrix Composites Suspension.
1097. An Investigation of Flow Properties of Metal Matrix Composite Suspensions for Injection Molding
110Advanced Materials in Armour Protection.
111International Journal of Chemical Engineering and Applications (IJCEA
112http://onlinelibrary.wiley.com/doi/10.1002/jccs.201400226/pdf
113Polymer Degradation and Stability Volume 103
114AIP Conf. Proc. 1621
115Advanced Materials Research Vol. 917 (2014) pp 28-3 Sami Ullah
116"IOP Conf. Series: Materials Science and Engineering 60 (2014) 012023.
117Applied Mechanics and Materials
118Applied Mechanics and Materials .Sami Ullah
119MATEC web of conferences (ICPER 2014) Woo TzeKeong
120AIP Conference Proceedings
121Advanced Material Research
122MATEC WEB of conferences
123International Journal of ELECTROCHEMICAL SCIENCE M. I. Irshad
124The 3rd intl. conference on Fundamental & Applied Sciences
125The 23rd Scientific Conference of the Microscopy Society Malaysia 2014 (SCMSM2014) M. I. Irshad
126Materials Research Bulletin M. I. Irshad
127Materials Letters M. I. Irshad
128MATEC WEB of conferences M. Irfan Shirazi
129Advanced Materials Research Hammad Aziz
130Matec Web of Conferences Hammad aziz
131InCIEC-2014 Hammad Aziz
132Accepted for Publication in Malaysian Journal of Microscopy Faiz Ahmad
133Materials Science and Engineering A M Gebremariam
134Applied Mechanics and Materials A S Muhsan
135AIP Conference Proceedings N. Amir
136AIP Conference Proceedings Ali Samer Muhsan
137Matec Web of Conferences Iman EslamiAfrooza
138International Journal of Powder Metallurgy Ali Samer Muhsan
139Matec Web of Conferences
140Nanoscience and Nanotechnology Letters Ali Samer Muhsan
141Applied mechanics and Materials Faiz Ahmad
Working Experience
No.PositionFrom - To (Year)Company Name
1Principal Research Officer1991 - 2000Min. of Defence, Govt of Pakistan
2Research officer1986 - 1986Govt of Pakistan
3Associate Professor2000 - 2003National University of Sciences and Technology, Rawalpindi
4Associate professor2003 - 2017Universiti Teknologi PETRONAS
5Assistant Manager1984 - 1986A-Enterprises Limited
6Researcher1986 - 1990Brunel University- Materials Technology
Membership
No.PositionFrom - To (Year)Professional Bodies / Association
1Member1984 - 2012Pakistan Intitute of Metallugical Engineers
2member1988 - 2020Pakistan Institute of Engineers
3member ( in Process)2008 - 2010Soc. of Professional Engineers Ontario- Canada
4Member2005 - dateAmerican Powder Metallurgy Institute
5C Eng - IOM3
6Fellow2017 - IOM3
7Vice President2016 - to dateMalaysian Powder Metallurgy and Particulate Materials Association
8Life Member2015 - Malaysia Tribology Society
9Postgardprofessional2016 - 2017IOM3
Research
No.Level of involvementResearch Title
1Member
Nano-Polishing of Ti-6Al-4V with Ionic Liquid
2Leader
Synthesis of Novel PDMS/BPA Epoxy Resin for Development of Non-Toxic Intumescent Fire Retardant Coatings
3Member
Study on Thermal and Mechanical Properties of Short Hybrid Fibers Reinforced Epoxy-Based Intumescent Fire Retardant Coating for Structural Application
4Member
Enhancement of Intumescent Fire-Retardant Coating for Steel Structures Using Synergistic Filler from Modified Bauxite Waste
5Member
Enhancement of Properties of Fire Retardancy and Strength of Intumescent Coatings by Refractory-Types Hybrid Fibre Reinforcement for Passive Fire Protection of Steel Structures
6Leader
Effects of Sintering Environment on Mechanical Properties & Corrosion Resistance of the Powder Injection Molded 316L Stainless Steel
7Leader
Fundamental Study on Synthesis and Characterization of Inorganic Nano-Filler Reinforced Intumescent Fire Retardant Coating for Structural Application
8Leader
​Development of Prototype of Nano Ceramic Fillers Reinforced Intumescent Fire Retardant Coating for Fire Protection of Structures.
9Member
Enhancement of Fire Resistance and Strength Properties of Intumescent Coatings by Refractory-Types Hybrid Fiber
10Leader
Pre-Commercialization of Copper–Carbon Nanotube Nanocomposite for Thermal Management System in LED Applications
11Leader
A New Intumescent Fire Retardant Material Based on Expandable Graphite and Local Inorganic Fillers
12Leader
Green Intumescent Fire Protective Coating for Structural Application
13Leader
Development of Prototype of Mineral Based Intumescent Fire Retardant Coating for Fire Protection of Structures
14Leader
Development of a Thermal Management System for a Commuter Electric Vehicle for PGMC 2012
15Member
Friction Stir Welding (FSW) of A1 242/A12O3 Metal Matrix Composite
16Leader
Corrosion Behaviour of Powder Injection Moulded Parts Sintered in Vacuum
17Leader
Metal Injection Moulding of Carbon Nanotubes Reinforced Copper Composites for Thermal Management
18Member
Investigation of Mechanical Properties of Multi-Walled Carbon Nanotubes/Polypropylene (MWCNT/PP) Nanocomposites
19Leader
Drilling and Finite Element Modeling of Drilling Behavior of Fiber Composite and Hybrid Fiber Composite
20Member
Co/Cr/Pt Nanowires for High Density Memory Storage Media
21Leader
Development of CNTs/Cu Nano-Composite Heat Sink for Electronic Packaging Applications
Recognition
No.Recognition TitleFrom - To (Year)Organizer / Bodies
1

​Metal Powder Industries Federation USA

2007 - 2008
2

​WHO IS WHO

2006 - 2007
3

​Session Chair- Internation Conf-  American University of Sharjah

2006 -
4

​Publication award by UTP

2007 - 2008
5 -
62005 - 2010
7

​Adjunct professor- COMSATS Lahore Campus

2010 - 2012
8

​Organise  first ICPER   in 2008  under Mechanical Engineering

2008 - 2008
9

​Ministry of Science and Technology Government of Pakistan

Appointed to audit research progress on Govt funded projects

2003 - 2003
10

​Appointed as Subject Expert- Punjab University Lahore- Pakistan

 -
11

​Peer Reviewer- JOHN Wiley, and Several Others  total  25 International Journals

2007 - 2010
12

​Elsevier

2005 - 2010
13

​SIRIM  Bhd

2007 - 2010
14

​Subject expert- Punjab University

 -
15

​PETRONAS Polymer Advisory Council​

2009 - 2011
16

​External Examiner- Ph.D Thesis  India​

2009 - 2009
17

​IENA​- Germany

Silver Medal on Fire Retardant Paint

2010 - 2010

Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia

Tel: 1-300-22-8887 | Enquiries: UCS Portal

Approval by Registrar of MOHE: KP(JPS)5195/US/7(9)

MOHE Registration Certification No: DU003(A)

Copyright © Universiti Teknologi PETRONAS

Disclaimer: Universiti Teknologi PETRONAS shall not be liable for any loss or damage caused by the usage of any information obtained from this web site. Privacy Notice Best Viewed using Google Chrome 46.0 and Above. All Rights Reserved.